Samsung DCS Programming Manual page 400

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 854
FOR: iDCS100 iDCS500
Purpose: Sets the Diagnostic Time. The system diagnostics tests include memory au-
dits, internal loop-back tests on digital trunks, and DSP and AA DSP tests. Additional
tests include CODEC tests on analogue trunk and station cards and tone tests. If the di-
agnostics cannot complete the tests because of system traffic, the system will abort the
test and retry during the next programmed diagnostic time. It is recommended that you
assign the diagnostic time during non-peak traffic periods.
DIAL PAD DAY SELECTION
0= Sunday
1= Monday
2 = Tuesday
3 = Wednesday
ACTION
1. Open programming and select 854
Display shows
2. Dial day selection 0–6 (e.g. MON)
OR
Press VOLUME keys to select day and press
RIGHT soft key
3. Enter hour in 24-hour clock format (e.g. 23 is
11pm)
4. Enter minutes in 24-hour clock format (e.g. 30)
(In this example, testing will start at 11.30pm on
Monday)
System returns to step 2
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
OS500
4 = Thursday
5 = Friday
6 = Saturday
None
MMC 852 Assign System Alarms
MMC 854 (Page 1 of 1)
DIAGNOSTIC TIME
(iDCS systems must have a LAN interface installed.)
DISPLAY
DIAGNOSTIC TIME
SUN:
DIAGNOSTIC TIME
MON: _
DIAGNOSTIC TIME
MON: 23
DIAGNOSTIC TIME
MON: 23
MMC PROGRAMS
FEBRUARY 2004
:
:
:_
:30