Samsung DCS Programming Manual page 205

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 511
FOR: DCS CII
Purpose: Sets the cadence (flash rate) for the message waiting LED on single line tele-
phones, for systems which have a message waiting card (MWSLI) installed.
The cadence is set as interrupted (on/off) values. For iDCS and OS500 systems, it may
alternatively be set as Continuous.
The lowest on or off value is 0100 msec. The highest is 03000 msec.
For all systems except iDCS and OS500
ACTION
1. Open programming and select 511
Display shows
2. Enter value for ON followed by value for OFF
(enter all four digits)
3. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
For iDCS and OS500 systems
ACTION
1. Open programming and select 511
Display shows
2. Press VOLUME keys to select INTERRUPT or
CONTINUOUS (e.g. INTERRUPT) and press
RIGHT soft key
3. Enter value for ON followed by value for OFF
(enter all four digits) e.g. 2000 for ON
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
iDCS100 iDCS500
ON 1000 (msec)
OFF 1000 (msec)
None
MMC 511 (Page 1 of 1)
MW LAMP CADENCE
OS500
DISPLAY
MW LAMP CADENCE
ON: 1000
MW LAMP CADENCE
ON: 2000
DISPLAY
MW LAMP CADENCE
INTERRUPT LED
MW LAMP CADENCE
1000 1000
MW LAMP CADENCE
2000 1000
MMC PROGRAMS
FEBRUARY 2004
OFF:1000
OFF:2000