Samsung DCS Programming Manual page 284

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
DID NUM/NAME
ITP REGISTRATION
SET RELOCATION
The DIRECTORY NAME that appears on the SMDR header is written using the keypad.
Pressing a key selects a character and moves the cursor to the next position. For exam-
ple, if the directory name is "SAM SMITH," press the number "7" four times to get the let-
ter "S." Now press the number "2" once to get the letter "A." Continue selecting charac-
ters from the keypad to complete the name. Press the programmable
between upper and lower case text. (Refer to
tions.)
Tip: When the character you want is on the same key as the previous character you typed in, press the
VOLUME UP key to move the cursor to the right, and enter the new character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
Example 1: Switching options on (yes=print) or off (no=do not print)
ACTION
1. Open programming and select 725
Display shows
2. Dial the option number (e.g. 00)
OR
Use the VOLUME keys to scroll through options
and press RIGHT soft key
3. Use the VOLUME keys to select YES or NO
and press the RIGHT soft key to save the data and
return to step 2
4. After all desired options have been selected and
set, press Transfer/TRSF to exit
OR
Press SPEAKER to exit and advance to next MMC
Determines whether DDI number and name print on SMDR. (Not
available on 408 or iDCS systems.)
Determines whether registration of ITP phones prints on SMDR
(OS500 only)
Determines whether Set Relocations print on SMDR (see
315) (OS500 only)
! : ? .
^ ( ) _
MMC 725 (Page 2 of 3)
section 1.5.2 in Part 1 for key descrip-
, % $ -
+ { } |
DISPLAY
PAGE HEADER
PRINT : YES
PAGE HEADER
PRINT : YES
PAGE HEADER
PRINT : NO
MMC PROGRAMS
FEBRUARY 2004
MMC
"A" key to toggle
< > / =
→
; " `