Samsung DCS Programming Manual page 59

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 113
FOR:
Purpose: Enters memos on stations. Up to three memos can be entered, depending on
your system. MMC 116 (Alarm and Message)
user to read the memo(s).
Each memo can be up to 13 characters long and is entered using the dial keypad. For
example, press "6" twice to enter the letter "M", and press "3" three times for an "E". Con-
tinue selecting characters from the keypad to complete the memo. Press the program-
mable "A" key to toggle between upper and lower case text. (Refer to
Part 1 for key descriptions.)
Tip: When the character you want is on the same key as the previous character you typed in,
press the VOLUME Up key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
ACTION
1. Open programming and select 113
Display shows
2. Dial the keyset number (e.g., 205)
OR
Press VOLUME keys to select station and
press RIGHT soft key to move cursor
3. Dial memo number (1–3)
OR
Press VOLUME keys to select and press RIGHT
soft key to move cursor
4. Press RIGHT soft key to move cursor and add
memo using above procedure
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ALL SYSTEMS
! : ? .
^ ( ) _
None
MMC 116 Alarm and Message
MMC 113 (Page 1 of 1)
VIEW MEMO NUMBER
can be programmed to remind the keyset
, % $
+ { }
DISPLAY
[201] VIEW MEMO
1:
[205] VIEW MEMO
1:
[205] VIEW MEMO
1:_
[205] VIEW MEMO
1:CALL TOM
MMC PROGRAMS
FEBRUARY 2004
section 1.5.2
- < > /
→
| ; "
in
=
`