Samsung DCS Programming Manual page 313

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 747
FOR: iDCS100
Purpose: Defines the billing charges for each phone call cost rate. There are eight call cost
rates. Each rate has the following data fields.
First Interval Duration: The amount of time at the beginning of each call to which a fixed
cost is applied. The range is 0 to 999 seconds; for example, 180 seconds (three minutes).
First Interval Cost: The cost for the first interval duration. The range is 0–999 pence (or
cents if the 'Use Euro' option is set on in
Second Interval Duration: The duration of each billing increment after the first interval has
expired. The range is 0–999 seconds; for example, 006 seconds (six seconds).
Second Interval Cost: The cost for each billing increment. The range is 0–999 pence (or
cents if the 'Use Euro' option is set on in
Surcharge: This is a one-time charge applied to a call over and above the time charges.
The range is 0–999 pence (or Ecents).
ACTION
1. Open programming and select 747
2. Dial Cost Rate number 1–8 (e.g., 3)
OR
Press VOLUME keys to select and press
RIGHT soft key
OR
Select all rates
3. Enter First Interval Duration in seconds, e.g. 060
(one minute) and press VOLUME UP key
4. Enter First Interval Cost, e.g. 125
using the keypad and press VOLUME UP key
5. Enter Second Interval Duration in seconds, e.g.
006 (six seconds) and press VOLUME UP key
6. Enter Second Interval Cost, e.g. 030
using the keypad and press VOLUME UP key
RATE CALCULATION TABLE
iDCS500 OS500
MMC
MMC
(see section 1.5.2)
MMC 747 (Page 1 of 2)
210). For example, 100 is £1.00 or 1 Euro.
210). For example, 025 is £0.25 or 25 Ecents
DISPLAY
COST RATE
1ST DUR :000 SEC
COST RATE
1ST DUR :000 SEC
COST RATE
1ST DUR:060 SEC
COST RATE
1ST COST:125
COST RATE
2ND DUR:006 SEC
COST RATE
2ND COST:030
MMC PROGRAMS
FEBRUARY 2004
(1)
(3)
(3)
(3)
(3)
(3)