Samsung DCS Programming Manual page 104

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 221
FOR: DCS CII
iDCS100
Purpose: Defines stations for a specific use. Each station can be designated as one of
the six types listed below. These types can be changed by dialling the type number (0–5)
or by scrolling through the types and pressing the right soft key to select the type de-
sired.
0 NORMAL STATION
This is the default setting. The station will operate in the normal manner associated with
this type of station. Ports designated as VMAA in
mal' in this MMC.
1 GUEST SMOKING
When a station is designated as this type it will appear in room status and check-in fea-
tures as a smoking room.
2 GUEST NO SMOKING
When a station is designated as this type it will appear in room status and check-in fea-
tures as a non-smoking room.
3 MEETING ROOM
Stations designated as Meeting Rooms will have the same attributes as guest rooms
with regard to cleaning and occupied status but will not show up while scrolling through
room status lists.
4 ADMINISTRATOR
Only stations designated as Administrator stations can use Hotel features such as check
in, check out, billing, etc.
5 FAX STATION
When a station is designated as a fax station it can be assigned as a 'pair' station to a
Guest Smoking Room or Guest No Smoking Room in
ACTION
1. Open programming and select 221
Display shows
2. Dial station number (e.g., 214)
OR
Press VOLUME keys to select station
and press RIGHT soft key to move cursor
3. Dial 0–5 to select station type (e.g. 2)
OR
Press VOLUME keys to select option and press
RIGHT soft key
OS500
iDCS500
MMC 221 (Page 1 of 2)
EXTENSION TYPE
Hotel application only
MMC 207 must be designated as 'nor-
MMC 222.
DISPLAY
[201] PHONE USE
NORMAL STATION
[214] PHONE USE
NORMAL STATION
[214] PHONE USE
GUEST NO SMOKING
MMC PROGRAMS
FEBRUARY 2004