Samsung DCS Programming Manual page 183

Combined systems
Hide thumbs Also See for DCS:
Table of Contents

Advertisement

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 500
FOR:
Purpose: Sets the values of the system counters. The counters are listed below with a
brief description of each.
DIAL
COUNTER
0
ALARM REMINDER
1
AUTO REDIAL
2
DISA CALL
3
DISA LOCK
4
NEW CALL
5
UCDS VISUAL
ALARM*
6
UCDS AUDIO
ALARM*
7
UCD CS LEVEL 1*
8
UCD CS LEVEL 2*
* Options 5–8 are not available on 408/408i systems.
SYSTEM-WIDE COUNTERS
ALL SYSTEMS
DESCRIPTION
The number of times that an alarm reminder will ring a station
before cancelling. RANGE = 1–99.
The number of times the system will redial an outside number
after the auto redial feature has been activated. RANGE = 1–99.
Sets the maximum number of internal calls that can be made af-
ter accessing a DISA line. RANGE = 1–99.
Number of attempts the system will allow to incorrectly access a
DISA line before locking out the DISA line. RANGE = 1–99.
Number of times the system will allow a user to signal New Call
on a C.O. line during one call. RANGE = 1–99.
Used to set the Visual Alarm threshold. It is triggered when the
number of calls waiting to be answered in the UCD group
reaches this value. RANGE = 0–25.
Used to set the Audio Alarm threshold. It is triggered when the
number of calls waiting to be answered in the UCD group
reaches this value. RANGE = 0–25
Provides call wait indication level 1 if number of calls waiting to
be answered in UCD group reaches this value. RANGE = 0–25.
Provides call wait indication level 2 if number of calls waiting to
be answered in UCD group reaches this value. RANGE = 0–25.
MMC 500 (Page 1 of 2)
MMC PROGRAMS
FEBRUARY 2004

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents