Samsung DCS Programming Manual page 109

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 300
FOR:
Purpose: Allows the following features to be set on or off for all or individual stations.
(Some may not be available on your system.)
ACCESS DIAL
MICROPHONE
OFFHOOK RING
SMDR PRINT
TGR ADV.TONE
VMAA FORWARD
NGT PASSCODE
INTRCOM SMDR
or
STN CALL PRT
FWD DLY USE
FORWARD OVRD
RECL TO OPER
SLT PWR DISC
CUSTOMER ON/OFF
PER STATION
ALL SYSTEMS
ON = user can select a trunk or trunk group by dialling its di-
rectory number (DN). This selection should be turned OFF
when using LCR.
ON = keyset can be used in speakerphone mode.
ON = allows a short burst of ring tone to indicate another call.
OFF = C.O. calls to and from the station will not print on
SMDR. This includes transferred calls or calls picked up from
hold or park.
ON = a warning tone will be heard each time LCR advances to
the next route.
ON = calls can be forwarded to voice mail.
ON = requires passcode when invoking night service.
OFF= the station will not print internal calls on SMDR.
ON = calls will overflow to the Forward No Answer destination
when the Forward No Answer timer expires even when the
Forward No Answer feature is not activated at the called party
extension.
Set the Forward No Answer destination in
ward, but do not enable the feature. (Alternatively, use code
603 plus the station number, then code 600 to cancel the fea-
ture.)
ON = the station overrides the call forward feature set on a
called extension. (Used for operator positions.)
Used for an operator's extension and in conjunction with a CTI
operator's console. If a transferred call from an extension is re-
turned as unanswered, it will return to the operator group and
not the extension transferring the call.
ON = SLI port receives real disconnect signal instead of busy
or error tone. (VMAA or DATA ports always receive real dis-
connect signal.)
MMC 300 (Page 1 of 2)
MMC PROGRAMS
FEBRUARY 2004
MMC 102, Call For-