Samsung DCS Programming Manual page 307

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 742
FOR: DCS CI CII
Purpose: (This is a read-only MMC.)
Shows the status of the BSI card(s).
ACTION
1. Open programming and select 742
Display shows:
For Compact II or iDCS100 - "SUCC" (successful)
if status of BSI card is good, or "FAIL"
OR
For DCS - "M" = Master, "S" = Slave (not used)
"SUCC" (successful) if status of BSI card is good,
or "FAIL"
OR
For iDCS500 & OS500 - "SUCC" (successful) if
status of BSI card is good, or "FAIL", or "NONE" if
no card, for up to three cards
(Note: 'M' systems support one BSI card only —
same display as shown for DCS)
2. Press Transfer/TRSF to exit
OR
Press SPEAKER to advance to next MMC
Default Data:
Related Items:
iDCS100 iDCS500
None
MMC 737 DECT System Code
MMC 738 DECT Clear Registration
MMC 739 BSI Download
MMC 741 BSI Card Restart
MMC 743 DBS Status
MMC 744 DECT Registration On/Off
MMC 745 BSI Carrier
MMC 742 (Page 1 of 1)
BSI STATUS
OS500
DISPLAY
BSI STATUS
SUCC
OR
BSI STATUS
M:SUCC S:NONE
OR
BSI STATUS
M:NONE-SUCC-NONE
MMC PROGRAMS
FEBRUARY 2004