Samsung DCS Programming Manual page 221

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 605
FOR:
Purpose: Determines which relays will close when one of the external page zones 5 to 8
is accessed. (816 and 408/408i systems have only one external page zone—see below.)
DCS
CII
816/408/408i
iDCS100
iDCS500
OS500
ACTION
1. Open programming and select 605
Display shows first page zone (member number
shows as 1 or 01 etc, depending on system)
2. Dial page zone number (e.g., 6)
OR
Press VOLUME keys to select desired page zone
number and press RIGHT soft key to move cursor
3. Dial member number (e.g., 3 or 03)
OR
Press VOLUME keys to select member number
and press RIGHT soft key to move cursor
OR
Press LEFT soft key to return to step 2
4. Dial relay number (e.g., 362 or 3602) and press
RIGHT soft key to return to step 2
OR
Press LEFT soft key to return to step 3
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
ALL SYSTEMS
System must be equipped with a Trunk A card to allow external paging. Each
Trunk A card is equipped with two external page relays. The page relays have
default DNs of 360X (e.g. 3601)
One external page zone is located on the base board. Three are located on
the optional MISC card. The page relays have default DNs of 36x (e.g. 361)
One external page zone (zone 5) is located on the base board. The page re-
lay has a default DN of 361. The optional port is 362 (see
One external page zone is located on the base board. Three are located on
the optional MISC card. The page relays have default DNs of 36x (e.g. 361)
System must be equipped with a MISC card for external paging
System must be equipped with a MISC card for external paging
None
MMC 219 Common Relay Service Type
MMC 605 (Page 1 of 1)
ASSIGN EXTERNAL
PAGE ZONE
DISPLAY
EXT. PAGE ZONE:(5)
MEMBER 1 :NONE
EXT. PAGE ZONE:(6)
MEMBER 1 :NONE
EXT. PAGE ZONE:(6)
MEMBER 3 :NONE
EXT. PAGE ZONE:(6)
MEMBER 3:362
MMC PROGRAMS
FEBRUARY 2004
MMC 219).