Samsung DCS Programming Manual page 134

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 318
FOR: DCS CI CII
Purpose: Sets a distinctive ring for stations when calling other stations or for trunks call-
ing stations. You can set the tone (T) for keysets to one of eight ring values (1-8), or the
cadence (C) of SLTs to one of five ring values (1–5). The default for both is to follow the
station ring (F-STN).
TONE DESCRIPTION
F-STN Calls from the programmed station or trunk will ring keysets with the keyset us-
ers' choice of ring frequency.
1–8 Calls from the programmed station or trunk will ring keysets with this ring fre-
quency.
CADENCE DESCRIPTION
F-STN Calls from the programmed station or trunk will ring with the normal SLT ring
cadences.
1 Calls from the programmed station or trunk will ring SLTs with the intercom ring
cadence.
2 Calls from the programmed station or trunk will ring SLTs with the CO ring ca-
dence.
3 Calls from the programmed station or trunk will ring SLTs with the DOOR ring
cadence.
4 Calls from the programmed station or trunk will ring SLTs with the ALARM ring
cadence.
5 Calls from the programmed station or trunk will ring SLTs with the CALLBACK
ring cadence.
ACTION
1. Open programming and select 318
Display shows
2. Dial station or trunk number (e.g., 205)
OR
Press VOLUME keys to select station or trunk and
press RIGHT soft key to move cursor
3. Press VOLUME keys to select T value (e.g. 1) and
press RIGHT soft key to move cursor to C field
4. Press VOLUME keys to select C value
(e.g. 2)
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to save and advance to next
MMC
816 408 408i
MMC 318 (Page 1 of 2)
DISTINCTIVE RING
iDCS100 iDCS500
DISPLAY
[201] DIST.RING
T:F-STN C:F-STN
[205] DIST.RING
T:F-STN C:F-STN
[205] DIST.RING
T:1
[205] DIST.RING
T:1
MMC PROGRAMS
FEBRUARY 2004
OS500
C:F-STN
C:2