Samsung DCS Programming Manual page 43

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 104
FOR:
Purpose: Enters a name, up to 11 characters, to identify an individual keyset. The name
will display in the keyset's LCD.
Names are written using the keypad. Each key press moves the cursor and enters the
selected character.* For example, if the name is "SAM SMITH", press the number "7"
four times to get the letter "S". Now press the number "2" once to get the letter "A" Con-
tinue selecting characters from the keypad to complete your name. Press the program-
mable "A" key to toggle between upper and lower case text. (Refer to
Part 1 for key descriptions).
* Tip: When the character you want is on the same key as the previous character you typed in,
press the VOLUME UP key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
ACTION
1. Open programming and select 104
Display shows
2. Dial station number (e.g., 205)
OR
Press VOLUME keys to select station and press
RIGHT soft key to move cursor
3. Enter the station name using the procedure
described above and press RIGHT soft key to
return to step 2
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
ALL SYSTEMS
! : ? .
^ ( ) _
None
None
MMC 104 (Page 1 of 1)
STATION NAME
, % $ -
+ { } |
DISPLAY
[201] STN NAME
[205] STN NAME
_
[205] STN NAME
SAM SMITH_
MMC PROGRAMS
FEBRUARY 2004
section 1.5.2 in
< > / =
→
; " `