Samsung DCS Programming Manual page 80

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 205
FOR: DCS CII 816
Purpose: Designates the station that controls the loud bell ring output. This output de-
pends on your system, as follows.
DCS
Compact II
816 and 408/408i
iDCS500
iDCS100
OS500
The loud bell will follow the ring cadence of the designated station. Only a station can be
assigned to control the loud bell; a station group cannot be assigned.
ACTION
1. Open programming and select 205
Display shows current setting
2. Dial loud bell number (e.g., 362)
OR
Press VOLUME keys to scroll through loud bell
numbers and press RIGHT soft key to move the
cursor
3. Enter station number (e.g., 201)
OR
Press VOLUME keys to make selection and
press RIGHT soft key to return to step 2
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
408i 408 iDCS100
Trunk A card. Each Trunk A card has one loud bell output; these
outputs are given a Directory Number of 3901–3920 as a default
value to enable them to be assigned.
Misc card (assigned in
Base board (assigned in
Misc card. Each Misc card has one loud bell output; these outputs
are given a Directory Number of 390x as a default value to enable
them to be assigned.
Misc card (assigned in
Misc card. Each Misc card has one loud bell output; these outputs
are given a Directory Number of 3995 ('L') or 2995 ('S' & 'M') as a
default value to enable them to be assigned.
NONE (Unassigned)
MMC 219 Common Relay Service Type
MMC 205 (Page 1 of 1)
ASSIGN LOUD BELL
iDCS500 OS500
MMC 219, Common Relay Service
MMC 219, Common Relay Service
MMC 219, Common Relay Service
DISPLAY
[361] LOUD BELL
RING PAIR : NONE
[362] LOUD BELL
RING PAIR : NONE
[362] LOUD BELL
RING PAIR :201
MMC PROGRAMS
FEBRUARY 2004
Type).
Type).
Type).