Samsung DCS Programming Manual page 55

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
NOT CONT.CID
AUTO ANS CO
ENBLOCK 2LCD
ACTION
1. Open programming and select 110
Display shows
2. Dial station number (e.g., 205)
OR
Press VOLUME keys to select keyset and press
RIGHT soft key to move cursor
OR
Select all stations
3. Press VOLUME keys to select option and
press RIGHT soft key to move cursor
4. Dial 1 for ON or 0 for OFF
OR
Press VOLUME keys to select ON or OFF and
press LEFT or RIGHT soft key to return to step 3
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
When ON, the keyset displays the call timer for the duration of
an incoming trunk call (if AUTO TIMER is ON). When OFF, the
CLIP number for a call is displayed for the duration of the call.
(Not applicable to 408 systems.)
If enabled (ON), keyset will automatically answer outside calls
through the speakerphone. For this to work, the keyset must
be set to Auto Answer mode in
not be auto-answered. (iDCS500 and OS500 systems only.)
Enables Enbloc dialling for 2-Line LCD phones. (OS500 sys-
tems only.)
(see section 1.5.2)
MMC 110 (Page 2 of 3)
MMC PROGRAMS
FEBRUARY 2004
MMC 103. Calls to groups can-
DISPLAY
[201] STN ON/OFF
AUTO HOLD :OFF
[205] STN ON/OFF
AUTO HOLD :OFF
[ALL] STN ON/OFF
AUTO HOLD :?
[205] STN ON/OFF
HOT KEYPAD : ON
[205] STN ON/OFF
HOT KEYPAD :OFF