Samsung DCS Programming Manual page 403

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 856
FOR: iDCS100 iDCS500
Purpose: (This is a read-only MMC.)
Lists the date, time and entry location of the last eight technician-level and customer-
level programming accesses. This allows you to determine if there was unauthorised ac-
cess to system programming and where this access occurred.
There are four types of access location information:
NNN(N) The extension number of a keyset that accessed programming (e.g. 211)
MODEM Indicates that programming was accessed by PCMMC via the integrated
V90 modem attached to (i) the IOM board (iDCS500 or OS500) or (ii) the
MISC card (iDCS100).
Indicates that programming was accessed by PCMMC via the LAN connec-
LAN
tion on (i) the IOM board (iDCS500) or (ii) the MEM4 card (iDCS100) or (iii)
the MCP2 card (OS500)
Indicates that programming was accessed by PCMMC via (i) one of the SIO
SIOx
connections on the IOM board (iDCS500 or OS500) or (ii) the MISC /
MEM4 card (iDCS100)—where x is the number (1–4) of the SIO port that
was used.
ACTION
1. Open programming and select 856
Display shows entry (1) with the start programming
time and date (MM/DD/HH/MM) on the top line and
the access location (e.g. station 211) and end date
and time of programming on the lower line
2. Press VOLUME keys to scroll through options 1–8
3. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
OS500
None
MMC 200 Open Customer Programming
MMC 800 Enable Technician Program
MMC 856 (Page 1 of 1)
PROGRAMMING LOGS
(iDCS systems must have a LAN interface installed.)
DISPLAY
(1)
211 : 10/14
(2)
211 : 10/24
MMC PROGRAMS
FEBRUARY 2004
10/14 10.17
10.18
10/24 14.17
14.18