Samsung DCS Programming Manual page 326

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 761
FOR: DCS CII
Purpose: Sets up the eight tax rates used in
described below. In addition, a name (up to 10 characters) may be used to define the
purpose of the tax. The options are:
TAX RATE: The number assigned to this tax rate. The tax rates are numbered 1 to 8 to
match the rate field in MMC 760, counting from left to right.
TYPE: The type of tax. Defines if the value is added as a percentage (%) of the cost of
an item, is included as a percentage of the cost of the item (I) or is added as a fixed cur-
rency value to an item (C). For example, % = service charge, I = VAT, C = admin.
VALUE: The actual tax rate that will be applied to the item cost.
NAME: The name (up to 10 characters) that will be displayed on the room bill alongside
the tax (e.g. VAT, Service Charge).
Names are entered using the keypad. (Refer to the description "Item Names" in
760.)
ACTION
1. Open programming and select 761
Display shows
2. Enter valid tax rate number (1–8)
OR
Press VOLUME keys to select number and press
RIGHT soft key
3. Dial 0 for '%' or 1 for 'C' or 2 for 'I' (e.g. 2)
OR
Press VOLUME keys to select type and press
RIGHT soft key
4. Enter the tax rate value via the keypad (e.g. 17.5)
If entry is valid, the system advances cursor
5. Enter tax name (e.g. VAT) and press right soft
key to return to step 2
6. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
iDCS100 iDCS500
All rates=%
MMC 760 Item Cost Table
MMC 761 (Page 1 of 1)
TAX RATE SETUP
OS500 Hotel application only
MMC 760. Each tax rate can be defined as
DISPLAY
TAX RATE
TYPE:% VAL:00.00
TAX RATE
TYPE:% VAL:00.00
TAX RATE
TYPE:I VAL:00.00
TAX RATE
TYPE:I VAL:17.50
TAX RATE
NAME:VAT
MMC PROGRAMS
FEBRUARY 2004
MMC
(1)
(1)
(1)
(1)
(1)