Samsung DCS Programming Manual page 360

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 825
FOR:
iDCS100 iDCS500
Purpose: Assigns the following networking options.
ADD NUMBER TO NAME Include the extension number in the name field of Q-SIG message
USE REMOTE VM
REMOTE VM NUMBER
REMOTE CID NUMBER
ACTION
1. Open programming and select 825
Display shows
2. Press VOLUME keys to select option and press
RIGHT soft key
3. VOLUME keys to select YES or NO
Press
and press RIGHT soft key
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
OS500 (iDCS systems must have a LAN interface installed.)
(select Yes/No).
Use remote Voice Mail (select Yes/No).
Access number of remote Voice Mail (VM) when the remote VM is
used (enter remote VM number).
Include node number when sending Caller ID through Voice Mail
card (select Yes/No).
ADD NUMB TO NAME: YES
USE REMOTE VM: NO
REMOTE VM NUMBER: None
REMOTE CID NUMBER: YES
MMC 710 LCR Digit Table
MMC 724 Dial Numbering Plan
MMC 820 Assign System Link ID
MMC 825 (Page 1 of 1)
ASSIGN NETWORKING
OPTIONS
DISPLAY
ADD NUMB TO NAME
YES
USE REMOTE VM
NO
USE REMOTE VM
YES
MMC PROGRAMS
FEBRUARY 2004