Samsung DCS Programming Manual page 303

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 738
FOR: DCS CI CII
Purpose: Deletes previously registered information for DECT handsets. This MMC has
two modes:
FORCED: When this mode is programmed, the system clears the registered informa-
tion by force.
NORMAL: Whenever the system wants to clear the registration of a DECT handset,
the deletion must be confirmed from the handset. If the confirmation is successful,
the system clears the registered information. (If the confirmation fails, the system
cannot clear the information.)
ACTION
1. Open programming and select 738
Display shows
2. Enter the number of the DECT handset to clear
and press the RIGHT soft key to move the
cursor
3. Select the de-registration (clear) mode using
VOLUME keys (e.g. Normal) and press the RIGHT
soft key to move the cursor
4. Enter 1 for YES (or 0 for NO) for DECT CLEAR
OR
Press VOLUME keys to select
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
DECT CLEAR REGISTRATION
iDCS100 iDCS500
Forced mode
MMC 737 DECT System Code
MMC 739 BSI Download
MMC 741 BSI Card Restart
MMC 742 BSI Status
MMC 743 DBS Status
MMC 744 DECT Registration On/Off
MMC 745 BSI Carrier
MMC 738 (Page 1 of 1)
OS500
DISPLAY
[7901]DECT CLEAR
MODE: FORCED
[7901]DECT CLEAR
MODE: FORCED
[7901]DECT CLEAR
MODE: NORMAL
[7901]DECT CLEAR
DECT CLEAR:YES
MMC PROGRAMS
FEBRUARY 2004