Samsung DCS Programming Manual page 331

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 802
FOR:
Purpose: Allows the installer to designate to which MMCs the system administrator (or
"customer") has access. For example, it is advised that the customer has access to MMC
102, Call Forward, for call forwarding but it is not advised that the customer has access
to MMC 710, LCR Digit Table, for LCR dial plans.
NOTE: MMC 802 is for both tenants on DCS, iDCS500 and OS500 systems.)
ACTION
1. Open programming and select 802
Display shows
DCS, iDCS500 and OS500 systems only—go to
step 2
Other systems—go to step 3
2. Enter desired tenant number (1–2)
OR
Press VOLUME keys to make selection and
press RIGHT soft key to move cursor
3. Enter desired MMC number (e.g. 102)
OR
Press VOLUME keys to make selection and
press RIGHT soft key to move cursor
4. Enter 1 for YES or 0 for NO
OR
Press VOLUME keys to make selection and press
LEFT soft key to return to step 3 to make additional
entries
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
100–119, 121, 201, 202, 209, 211–14, 216, 300–306, 308, 309, 312, 315, 317, 404–406,
408–412, 414–416, 421, 500, 502, 505, 508, 512, 600–602, 604, 606, 607, 705–708, 714,
715, 720–722, 725, 727, 728.
Related Items:
ALL SYSTEMS
Customers have default access to the following MMCs:
None
MMC 802 (Page 1 of 1)
CUSTOMER ACCESS
MMC NUMBER
DISPLAY
CUSTOMER ACCESS
100:STN LOCK:YES
OR
CUST.USE MMC : (1)
100:STN LOCK:YES
CUST.USE MMC : (1)
100:STN LOCK:YES
CUSTOMER ACCESS
102:CALL FWD:YES
CUSTOMER ACCESS
102:CALL FWD:NO
MMC PROGRAMS
FEBRUARY 2004