Samsung DCS Programming Manual page 354

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 821
FOR: iDCS100
Purpose: Assigns TEPRI cards to use the Q-SIG protocol.
Note: iDCS100 systems require a MEM4 card.
ACTION
1. Open programming and select 821
Display shows
2. Press VOLUME keys to select trunk number (e.g.
701) and press RIGHT soft key
3. Press VOLUME keys to select NORMAL trunk or
Q-SIGNALING trunk and press RIGHT soft key to
return to step 2
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ASSIGN NETWORKING TRUNK
iDCS500 OS500
NORMAL
Q-SIG Networking
MMC 821 (Page 1 of 1)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
[701] Q-SIG TRK
NORMAL
[701] Q-SIG TRK
NORMAL
[701] Q-SIG TRK
Q-SIGNALING