Samsung DCS Programming Manual page 255

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 711
FOR:
Purpose: This table gives flexibility to the system, through the LCR ROUTES, to allow
calls placed at any given time of day to use the least cost trunk route that is available.
When LCR ROUTE ADVANCE is allowed, it is possible for calls to be placed on more
expensive trunks on any given time of day. There are four possible time entries per day;
the start time of the next time period is the end time of the previous time period.
FEATURE KEYS
DAY DIAL
SUN 0
MON 1
TUE 2
WED 3
THU 4
FRI 5
SAT 6
ACTION
1. Open programming and select 711
Display shows
2. Dial day of week (SUN–SAT, e.g., WED)
OR
Press VOLUME keys to make day selection and
press RIGHT soft key
3. Dial time band (A–D, e.g., B)
OR
Press VOLUME keys to make selection and press
RIGHT soft key
4. Dial time via keypad (24-hour clock format, e.g.
0800)
Cursor moves to LCRT
5. Dial entry 1–4 (e.g. 2)
OR
Press VOLUME keys to select entry and press
RIGHT soft key
6. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
LCR TIME TABLE
ALL SYSTEMS
TIME
DIAL
BAND
A 0
B 1
C 2
D 3
MMC 711 (Page 1 of 2)
MMC PROGRAMS
FEBRUARY 2004
LCRT
LCRT
LCRT
LCRT
LCRT
DISPLAY
LCR TIME (SUN:A)
HHMM: 0000 LCRT:1
LCR TIME (WED:A)
HHMM: 0000 LCRT:1
LCR TIME (WED:B)
HHMM: 0000 LCRT:1
LCR TIME (WED:B)
HHMM:0800 LCRT:1
LCR TIME (WED:B)
HHMM:0800 LCRT:2
DIAL
1
2
3
4