Samsung DCS Programming Manual page 146

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 404
FOR:
Purpose: Allows a name, up to 11 characters, to be entered to identify an individual
trunk.
Names are written using the keypad. Each key press moves the cursor and enters the
selected character.* For example, if the name is "TELECOMS", press the number "8"
once to get the letter "T". Now press the number "3" twice to get the letter "E." Continue
selecting characters from the keypad to complete the name. Press the programmable
key to toggle between upper and lower case text. (Refer to
descriptions.)
* Tip: When the character you want is on the same key as the previous character you typed in,
press the VOLUME UP key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
ACTION
1. Open programming and select 404
Display shows
2. Dial trunk (e.g., 704)
OR
Press VOLUME keys to select trunk and press the
RIGHT soft key to move the cursor
3. Enter trunk name using the procedure described
above
Press RIGHT soft key to return to step 2
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ALL SYSTEMS
! : ?
^ ( )
No names entered
MMC 104 Station Name
MMC 405 Trunk Number
MMC 404 (Page 1 of 1)
TRUNK NAME
. , % $
_ + { }
DISPLAY
[701] TRUNK NAME
[704] TRUNK NAME
_
[704] TRUNK NAME
TELECOMS
MMC PROGRAMS
FEBRUARY 2004
section 1.5.2 in Part 1 for key
- < >
→
| ; "
"A"
/ =
`