Samsung DCS Programming Manual page 179

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 428
FOR: DCS CII
Purpose: Controls whether trunks in a trunk use group can conference or tandem dial
on to trunks in other use groups. For example, to allow an incoming call on one trunk to
be externally transferred via another. Options are YES or NO.
Use groups are set up in
ACTION
1. Open programming and select 428
Display shows
2. Dial the first trunk use group number (e.g., 301)
OR
Press VOLUME keys to select group and press
RIGHT soft key
OR
Select all trunks
3. Dial the second trunk use group number (e.g.,
303)
OR
Press VOLUME keys to select group and press
RIGHT soft key
4. Dial 1 for YES or 0 for NO
OR
Press VOLUME keys to select YES/NO and press
RIGHT soft key
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ASSIGN TRUNK / TRUNK USE
816 iDCS100 iDCS500
MMC 614.
(see section 1.5.2)
DIAL=YES
MMC 614 Use Group
MMC 428 (Page 1 of 1 )
OS500
DISPLAY
[301] USE [301]
DIAL:YES
[301] USE [301]
DIAL:YES
[301] USE [303]
DIAL:YES
[301] USE [303]
DIAL:NO
MMC PROGRAMS
FEBRUARY 2004