Samsung DCS Programming Manual page 366

Combined systems
Hide thumbs Also See for DCS:
Table of Contents

Advertisement

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 831
FOR:
iDCS100
Purpose: Allows you to set parameters for the ITM3/MGI card.
iDCS ITM3 Card
IP ADDRESS
SUBNET MASK Specifies the IP subnet mask. When changing the address, three digits must be
GATEWAY
STS PERIOD
MAX FAX CH
CLIP TABLE
VOIP MODE
VERSION
OS500 MGI Card
IP ADDRESS
GATEWAY
SUBNET MASK Specifies the IP subnet mask. When changing the address, three digits must be
STS PERIOD
IP TYPE
VERSION
MAC ADDR
CARD RESET
iDCS500
OS500
Specifies the IP address for the ITM3 card. When changing the ad dress, three
digits must be entered for each field.
entered for each field.
Specifies the LAN gateway address when leaving the local network. When
changing the address three digits must be entered for each field.
Status Send Period designates the timed message cycle to check the remote
IP status (Range: 00–60 sec.)
Maximum facsimile channels. Specifies the maximum number of ITM3
channels that will accept IP T.38 protocol IP facsimiles (max=8, default=0).
Calling Line Identification Presentation table. This provides the calling station
number when calling from one ITM3 location to another. (Range=1–4 or
NONE.) If set to NONE, the trunk number set in
wise, the number set in
Three options are available:
FOLLOW DID TRANS
FOLLOW INCOM DGT (follow incoming digit) or
FOLLOW TRK RING
(MMC
Displays the ITM3 card version number
Specifies the IP address for the MGI card. When changing the address, three
digits must be entered for each field.
Specifies the LAN gateway address when leaving the local network. When
changing the address three digits must be entered for each field.
entered for each field.
Status Send Period designates the timed message cycle to check the remote
IP status (Range: 00–60 sec.)
IP address type is PUBLIC or PRIVATE.
Card version (MGI3 only).
MAC address (view only).
Select whether to restart card.
MMC 831 (Page 1 of 2)
VoIP PARAMETERS
(Systems with ITM3 or MGI card)
MMC 323
will be sent.
(MMC
714)
406).
MMC PROGRAMS
FEBRUARY 2004
MMC 405
will be sent. Other

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents