Samsung DCS Programming Manual page 348

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 815
FOR: iDCS100
Purpose: Enables the onboard customer database (SRAM) to be copied to the Smart-
Media card database (SMDB)—or the iDCS100 Flash Memory database (FLDB)—and
also allows a saved SMDB or FLDB database to be copied to the SRAM.
A daily save can be programmed to automatically save the SRAM to the SMDB or FLDB.
This ensures that an up to date database is always available in case of a system failure.
A daily save time of 00:00 means this option is disabled. It is recommended that you
CLEAR the SMDB or FLDB before the SRAM is copied to it. When the SRAM is copied
to the SMDB or FLDB there is no interruption in service. If the SMDB or FLDB is copied
to the SRAM the system will reset to accept the new data.
Note:
1 iDCS100 systems require a MEM4 card which contains the SRAM.
2 The SRAM is on the MCP/MCP2 card in iDCS500 and OS500 systems.
If the SmartMedia card or Flash Memory is in use when you run this program, a message
"SMART IS BUSY" or "FLASH IS BUSY" is displayed.
ACTION
To copy SRAM to SMBD or FLBD
1. Open programming and select 815
Display is date (MM/DD/YY) and time (HH:MM) of
last save
2. Press RIGHT soft key and then press VOLUME
keys to select CLEAR option
Press RIGHT soft key
3. Press VOLUME keys to select YES (or NO) and
press RIGHT soft key
4. Press VOLUME keys to select YES (or NO) and
press RIGHT soft key
Selecting YES will clear the database
5. Press VOLUME keys to select SRAM option
and press RIGHT soft key
6. Enter Daily Save time e. g. 0200
CUSTOMER DATABASE COPY
iDCS500 OS500
MMC 815 (Page 1 of 2)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
CUST.DBASE: SMDB
S:10/18/02 01:00
OR
CUST.DBASE: FLBD
S:10/18/02 01:00
CUST.DBASE: SMBD
CLEAR SMBD :NO
CUST.DBASE: SMBD
CLEAR SMBD :YES
CUST.DBASE: SMBD
ARE YOU SURE? :YES
CUST.DBASE: SRAM
DAILY SAVE: 01:00
CUST.DBASE: SRAM
DAILY SAVE: 02:00