Samsung DCS Programming Manual page 86

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
FEATURE DESCRIPTION
DISA PSWD Determines whether outside customers are required to enter DISA pass-
code (Yes=ON, No=OFF).
LCR ENABLE Enables LCR feature in the system.
SMDI VMS SET Allows SMDI integration through RS-232 port for the external PC-based
Voice Mail system.
PERI UCD RPT Periodic UCD information provider. Enables UCD statistics data on a per
UCD group basis to print out on the I/O port which has been set as SMDR
(iDCS only)
or UCD REPT in real time (see
or
tion). This allows extended manipulation of the information by an external
PERI UCD SET
third-party-provided software package.
(other systems)
(For iDCS & OS500 systems, refer to
CID CODE INS Allows the digit '1' to be automatically inserted for a toll call. (Not used in
UK.)
DISA MOH An additional option that can be presented to outside DISA callers: a vari-
able indication provided by an MOH source instead of a fixed DISA dial
tone.
TRANSFER MOH Callers who have been transferred from an extension or UCD group or AA
group will hear MOH, until answered by the called extension, instead of ring
back tone.
DSP SSPDNAME LCD displays programmed name of system speed bin if it has been pro-
grammed in MMC
(even if this option is set to ON).
[Note: iDCS500 'L' & OS500 systems use DISP SPDNAME option in
DID BSY ROUT DDI calls to a busy extension can be routed to an assigned destination, in
MMC 406, before the call is dropped.
DID NOT ROUT DDI calls with no mapping in MMC 714 can be routed to an assigned
destination in
ALARM MOH If the Wake-up Announcement feature
this option is turned ON, the user will hear the station Music-On-Hold
source as a wake-up alarm.
ALL PICK UP Independent pickup group; can pick up all calls.
MMC 501– PERI UCD REPORT
PERI UCD SIO
706; otherwise, it shows digits programmed in
MMC 406.
(MMC 224) is not programmed but
MMC 210 (Page 2 of 5)
DCS / CII
timer op-
option, below.)
MMC 705
MMC 110.]
MMC PROGRAM
FEBRUARY 2004
SYSTEM
816 408/408i
iDCS
408i only
iDC500 'M'
& iDC100
only
408i only
408i only
OS500