Samsung DCS Programming Manual page 129

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 315
FOR: DCS CII 816
Purpose: Used to transfer information associated with a station or add-on module
(AOM) to another station or AOM. All individual station assignments such as trunk ring,
station group, station COS, station speed dial and key assignments are transferred. A
user can then relocate to the new station and operate it exactly like their original station.
The stations being exchanged must be idle for this program to work, and programming
done from a different keyset.
There are two important rules to follow:
1. You can exchange 5000 series digital keysets only with other 5000 series digital key-
sets, Euro keysets with Euro keysets, and iDCS series with iDCS series.
2. Generally, you can only exchange keysets or AOMs of the same type (e.g. 6B with
6B, 48B with 48B).
However, there are exceptions to the second rule:
•
You can exchange a Euro 12B for a Euro 24B keyset, and vice versa.
•
You can exchange an iDCS 18D for an iDCS 28D keyset, and vice versa.
•
You can exchange a DCS 48B AOM for an iDCS 64B or DS-5064B AOM, and
vice versa.
Refer to the table, below, to determine which devices can be exchanged. Attempting to
exchange incompatible devices will result in an error message display ("INVALID
DATA").
Note:
1
If you are exchanging a Euro 12B and 24B keyset, be aware that the 12B keyset will assume the
key assignments for the first 12 keys on the 24B keyset. Conversely, the first 12 keys on the 24B
keyset will assume the key assignments for the 12B keyset.
2
If you are exchanging an iDCS 28D and 18D keyset, remember that for 18D keysets the first 10
programmable keys are numbered 01–10 and the last eight keys are numbered 21–28 (not 11–
18). When you exchange 18D and 28D keysets you copy keys 01–10 to keys 01–10 and keys
21–28 to keys 21–28. Keys 11-20 on 28D keysets will not be copied.
3
If you are exchanging a 48B AOM and a 64B AOM, the 48D keyset will assume the key assign-
ments for the first 48 keys on the 64B AOM. Conversely, the first 48 keys on the 64B AOM will
assume the key assignments for the 48B AOM. You must first remove any association with mas-
ter stations, using MMC 209, otherwise an error message will be displayed ("ERROR:AOM MAS-
TER").
408 408i iDCS100
3
MMC 315 (Page 1 of 3)
SET RELOCATION
iDCS500 OS500
MMC PROGRAMS
FEBRUARY 2004
1
2