Samsung DCS Programming Manual page 309

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 744
FOR: DCS CI CII
Purpose: Enables DECT handset registration on a telephone system. If this MMC is not
opened and an attempt is made to register a DECT handset, an error message will be
displayed. The default passcode for registration can be changed using
Change Feature Passcodes.
Caution: When you have finished registering handsets, run this MMC again to set
the registration mode to DISABLE. This will prevent unauthorised access to this
feature.
ACTION
1. Open programming and select 744
Display shows
2. Enter passcode
If the correct code is entered the display shows
An incorrect code entry shows
If the SYSTEM ID in MMC 737 (DECT System
Code) has not been set, the message shown will
be displayed
3. Dial 1 for ENABLE or 0 for DISABLE
OR
Press VOLUME keys to select and press RIGHT
soft key
4. Press Transfer/TRSF to exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
DECT REGISTRATION ON/OFF
iDCS100 iDCS500
DISABLE
MMC 202 Change Feature Passcodes
MMC 737 DECT System Code
MMC 738 DECT Clear Registration
MMC 739 BSI Download
MMC 741 BSI Card Restart
MMC 742 BSI Status
MMC 743 DBS Status
MMC 745 BSI Carrier
MMC 744 (Page 1 of 1)
OS500
DISPLAY
ENABLE DECT REG.
PASSCODE:
ENABLE DECT REG.
PASSCODE:
ENABLE DECT REG.
DISABLE
ENABLE DECT REG.
PASSCODE ERROR
ENABLE DECT REG.
NO REG. SYSTEM ID
ENABLE DECT REG.
ENABLE
MMC PROGRAMS
FEBRUARY 2004
MMC 202,