Samsung DCS Programming Manual page 139

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 323
FOR: iDCS100
Purpose: Allows a number (16-digit maximum) to be entered and associated with a station
number on a per-PRI/BRI basis. When this station makes an outgoing call, the number en-
tered will be the CLIP number sent. Numbers are entered into a table.
iDCS500 'L' and OS500 systems have four tables
Other iDCS systems have two tables
If no entry exists in a table for a station, the system uses the number for the trunk entered in
MMC 405 Trunk Number
ACTION
1. Open programming and select 323
Display shows
2. Dial station number (e.g., 205)
OR
Press VOLUME keys to select station and
press RIGHT soft key to move cursor
3. Dial table number (e.g. 2)
OR
Press VOLUME keys to select table and press
RIGHT soft key
4. Enter CLIP number (max 16 digits) and
press RIGHT soft key
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to save and advance to next
MMC
Default Data:
Related Items:
iDCS500 OS500
as the CLIP number to send.
None
MMC 405: Trunk Number
MMC 419: BRI Options
MMC 420: PRI Options
MMC 831: VOIP Parameters
MMC 323 (Page 1 of 1)
SEND CLIP NUMBER
DISPLAY
[201] SEND CLIP
1:
[205] SEND CLIP
1:
[205] SEND CLIP
2: _
[205] SEND CLIP
2: 01234567891
MMC PROGRAMS
FEBRUARY 2004