Performing The Instrument Function Test - Applied Biosystems 7300 Installation And Maintenance Manual

Chapter 3 Installing the Software and Powering On the Instrument

Performing the Instrument Function Test

Performing the Instrument Function Test
If the SDS software is not running, in the
1.
desktop, double-click the icon for the SDS
software ( ).
In the SDS software, click
2.
(or select File New).
In the New Document wizard, click
3.
accept the default parameters.
If an ROI error is displayed, click
4.
perform the ROI calibration after you perform
the Function test.
Notes
30
Applied Biosystems 7300/7500/7500 Fast Real-Time PCR System Installation and Maintenance Guide
to
. You
Double-click
Select
Click