Repeat
steps 8 through
17.
the sample block, and to verify that you have
eliminated the contamination.
Always use deionized water to
IMPORTANT!
rinse wells after cleaning with bleach or EtOH
solution.
If contamination is present, contact Applied
Biosystems technical support (see
Ensure that the heated cover assembly door is
18.
completely closed. If it is not, an error message is
displayed.
Notes
Applied Biosystems 7300/7500/7500 Fast Real-Time PCR System Installation and Maintenance Guide
11, to rinse the wells of
page
xiii).
Appendix A
Decontaminating the Sample Block
10% bleach solution
113
A