Applied Biosystems 7300 Installation And Maintenance Manual page 55

Press the power button on the 7300/7500/7500
2.
Fast instrument. The following occur:
• The indicator lights on the lower left of the
front panel cycle through a power on
sequence.
– If the green Power On indicator is
flashing, make sure the tray is closed.
– If the red Error indicator is lit, see
"Troubleshooting – Front Panel
Indicators" on page
• When the green Power indicator is lit (not
flashing):
– Communication is established between
the computer and the instrument.
– The Windows XP operating system
recognizes the instrument as new
hardware.
– The Windows XP operating system
automatically installs the drivers needed
to control the instrument.
• When the installation is complete, the
Found New Hardware message box
indicates that the hardware is ready to use.
Notes
Applied Biosystems 7300/7500/7500 Fast Real-Time PCR System Installation and Maintenance Guide
Chapter 3 Installing the Software and Powering On the Instrument
32.
Powering On the Instrument
Power button
Power On
(flashing)
Indicator lights
Close
the tray
29
3