■3. OS version confirmation
Confirm the system application version carefully when installing the BootOS and basic system application.
When the system application is installed, the GOT checks and compares the system application version automatically.
(1) When install BootOS
When the BootOS to be installed has the older major version, GOT displays the installation disapproving message to
cancel the installation so that the older version may not be written.
(Even when the version of the BootOS to be installed has the same or later version, the version information and the
dialog box for selecting continue/not continue will be displayed.)
Depending on the installation method, the dialog to be displayed varies.
• When installing from the Built-in SD card, the dialog is displayed by the main unit.
• When installing from GT Designer3 via USB, RS-232, or Ethernet, the dialog is displayed by GT Designer3.
(2) When install basic system application, communication driver, or system application (Extended
When a basic system application, communication driver, or system application (Extended function) has already been
installed, the version information of the system application which has been installed and the dialog for selecting
whether to continue the installation or not will be displayed.
Moreover, when the different versions will coexist among all applications (basic system application, communication
driver, and system application (Extended function)) by installing the system application, the installation disapproving
dialog will be displayed and the installation process is canceled.
(3) When download project data
The GOT automatically compares the version between the project data to be downloaded and the installed system
When the versions are different, the dialog confirming whether to install the system application together is displayed.
When downloading the project data from a data storage, storing the project data and system application beforehand
GRAPHIC OPERATION TERMINAL
MADE IN JAPAN
■4. Capacity confirmation of the project data downloading location
When download the project data, confirm the capacity of the user area in the drive to which transferred, the transferred
project data size, the transfer size and buffering area size of the system application (Extended function) in advance to
judge whether to carry out the download.
The capacities can be confirmed by GT Designer3.
Refer to the following for details.
GT Designer3 (GOT2000) Screen Design Manual
Version confirmation of BootOS by rating plate
Confirm the version of BootOS installed in the GOT at product shipment by rating plate of GOT
(In case that the BootOS is two digits, only the first digit is written.)
6.1 Data Type and Storage Location
6 - 3