Mitsubishi Electric GOT2000 Series User Manual page 575

No.
10) CPU No. specification
*1 When a timer or counter of the ACPU, QnACPU, or FXCPU is registered, the set value of the timer or counter is displayed.
■2. Key functions
The following table describes the key functions displayed on the device monitor screen.
Key switch
DEV
TEST
DEC/HEX
CH1 or CH2
Item
0 to 4: This item must be set only when the GOT is connected to the Q series CPU in
the multiple CPU system or QnUCPU.
Changing the CPU No. cancels the registration for all the devices.
➠
16.1.7 Device registration
Switches the screen to the device registration key window for registering devices to be
monitored.
➠
16.1.7 Device registration
Switches the quick test mode between enabled and disabled states.
➠
16.1.8 Quick test
Switches the numerical notation of word device values between decimal and
hexadecimal numbers.
Switches the channel to be displayed.
Scrolls the data list up and down by one line and displays the devices before or after
the device which is currently registered and placed in the top or bottom line.
: Scrolls the list up by one line to display the device number right before the device
number displayed in the top line.
: Scrolls the list down by one line to display the device number right after the device
number displayed in the bottom line.
Exits the device monitor, and then the screen returns to the debug screen.
Settings
Function
16.1 Device Monitor Function
16
16 - 5