Before performing the quick test operations of device monitor (such as turning ON or OFF bit device, changing the word device current
value, changing the settings or current values of the timer or counter), read through the manual carefully and make yourself familiar with
the operation method.
During quick test operation, never change the data of the devices which are used to perform significant operation for the system. False
output or malfunction can cause an accident.
The quick test operation procedure for monitor devices is described below.
Enable the quick test mode.
Check that the quick test
operation is enabled.
16 - 10
16.1 Device Monitor Function
(1) Quick test of bit devices
(2) Quick test of word devices