Security And Password - Mitsubishi Electric GOT2000 Series User Manual

15.8.5

Security and password

By setting a password for the backup/restore function, the authentication using a password can be conducted at the backup
or restoration.
The password for the backup/restoration and the password on the controller side are used for the authentication.
Backup
The following shows the passwords used at the backup or restoration.
Password
Password for the backup/restoration
Password on the controller side
Inputting the password on the controller side is not required at the backup or restoration after the first backup (setting of the
password for the backup/restoration). (The authentication of the password on the controller side is conducted automatically.)
Therefore, users have the following merits on the security.
User
Administrator
Operators on site
POINT POINT POINT
Before setting the password for the backup/restoration
When the password for the backup/restoration is forgotten, the backup and restoration cannot be
executed.
When the password for the backup/restoration is forgotten, format the SD card used or use a
new SD card to back up the data again.
For how to set a password for the backup/restoration, refer to the following.
➠ ■1.
For how to use the password for the backup/restoration after the setting, refer to the following.
➠ ■2.
Authentication of the password for backup/restoration
Automatic authentication of the
password on the controller side
Authentication of the password for backup/restoration
Automatic authentication of the
password on the controller side
This is a password for the authentication at the backup or restoration.
Set this password with the GOT at the first backup.
To set this password, a password on the controller side has to be set in advance.
This is a password set to the backup/restoration target file of the controller.
Set this password using the setting software of the controller when the file is written to the
controller.
Disclosing the password on the controller side to operators on site is not required.
(This prevents from browsing or editing the setting information of the controller by a person
other than the administrator.)
Data can be backed up or restored by using the password for the backup/restoration only.
(Inputting the password on the controller side is not required.)
Setting the password for the backup/restoration
How to use the password for the backup/restoration
SD card
Restoration
Description
Merit
15.8 Backup and Restoration
15
15 - 55