Adjusting the clock
Synchronize the clock data of the GOT with the clock data of the controller.
■1. Clock adjustment setting
Adjust the clock
Reference CH No.
SNTP IP address
Specify the time zone of target
Time difference from GMT
If you set this item to [SNTP server], set [Time zone] to the time zone of the local time.
If [Adjust the clock] is deselected or [Trigger Type] is set to [Sampling] in [GOT Setup] in the project data, only [Sampling] is
selectable as the trigger type for the clock adjustment in the utility.
If [Adjust the clock] is deselected or [Trigger Type] is set to [Sampling] in [GOT Setup] in the project data, [No setting] is displayed
Set whether to use the clock adjustment function.
Set the clock adjustment mode.
When selecting [External unit] for [Mode], set a reference
channel of the controller.
When selecting [SNTP server] for [Mode], set the IP
address of the SNTP server.
Touch the [Connection test] button to check the
connection with the SNTP server.
Set the trigger type for the clock adjustment.
• When selecting [Sampling] for [Trigger type], set the
sampling interval for the clock adjustment.
• When selecting [Rise] or [Fall] for [Trigger type],
information on the device set as a trigger is displayed.
Set whether to specify the time zone of the target
When selecting [Specify the time zone of target unit], set
the time zone.
When selecting [Custom] for [Time zone], set the time
difference based on GMT.
2.9.5 Local time
Settings of [Adjust] in the utility
Configure the settings in the utility and in [GOT Setup] on GT Designer3 by the same method.
GT Designer3 (GOT2000) Screen Design Manual
Yes (selected)/No (deselected)
<Default: No (deselected)>
External unit/SNTP server
<Default: External unit >
1 to 4
0.0.0.0 to 255.255.255.255
Trigger type: Rise/Fall/Sampling
Sampling interval: 1 to 1440
<Default: Not selected>
GMT-12:00 to GMT+13:00/Custom
Hour: -12 to 13
Minute: 0, 15, 30, or 45
<Default: 0 hour 0 minute>
2 - 35