Controller Contents - Mitsubishi Electric GOT2000 Series User Manual

2.10.3

Controller contents

This section describes setting items and display contents for a controller.
2)
3)
1) Channel-Driver assign
• Assignment of communication drivers to channels
Communication drivers installed in the GOT can be assigned to channels.
Even without setting [Controller Setting] on GT Designer3, communication with controller is available by
assigning channel No. with this function.
2.10.4 ■2. Channel-Driver assign operation
➠
• Changing the assignment of communication drivers to channels
Without using GT Designer3, the assignment of communication drivers to channels can be changed.
When change a communication driver, the alternative communication driver has to be installed in GOT in
advance.
2) Standard interface display box
The standard communication interfaces of the GOT are displayed.
There are the following 4 types.
RS-232
RS-422/485
USB (Device)
Ethernet
3) Extension interface display box
The name of the unit installed in the extension interface is displayed.
(Displays [None] when any unit is not mounted.)
For details of each unit, refer to the following.
➠
GOT2000 Series User's Manual (Hardware)
4)
6) 1)
For communicating with a controller
For communicating with a controller
For communicating with a personal computer (GT Designer3)
For communicating with a personal computer (GT Designer3) or a controller
5)
2 - 51
2.10 Controller
2