Setting) - Mitsubishi Electric GOT2000 Series User Manual

■3. Setting procedure for the time setting
(1) Current time
Carry out the display and setting of GOT clock data.
The setup methods of clock data are shown below.
Step 1.
Touch either the date or time to be changed.
Step 2.
Enter date or time on the ten-key pad.
The day of the week is displayed automatically according to the input date.
"0" to "9":
Use these keys to enter numerical values
"ESC":
Closes the ten-key window without saving any value entered for the date or time
"AC":
Deletes the entire string of numerical characters that are being entered
"DEL":
Deletes a digit from a string of numerical characters that are being entered
"ENT":
Enters the value for the date or clock that has been entered and closes the ten-key pad window
"+/-":
Switches between positive and negative values. (Only positive values are valid for the date or clock
setting.)
".":
Invalid key (not used)
Step 3.
After setting either the date or time, touch the [×] button to save the changes and close the setting
window.
(2) GOT internal battery voltage status (GT2103-P is excluded.)
Displays battery voltage status.
When the battery voltage is low, replace the battery immediately.
Refer to the following for battery replacement procedure.
➠
14 - 4
14.1 Time Setting and Display
Touch the item
to be changed.
Display
Normal
Low/None
GOT2000 Series User's Manual (Hardware)
Status
Normal
Low voltage