Mitsubishi Electric GOT2000 Series User Manual page 353

■2. Operation to restore data
Step 1.
To restore data in the SRAM user area to a drive
Select the drive where the data is stored, and then touch the [Restoration] button.
Step 2.
The dialog box shown below appears.
Check the description of the dialog box. To restore all data in the SRAM user area, touch the [OK] button.
To cancel the restoration, touch the [Cancel] button.
Step 3.
When touching the [OK] button in step2, the dialog box shown below appears for recheck.
To start the restoration, touch the [OK] button.
To cancel the restoration, touch the [Cancel] button.
Step 4.
The completion dialog box appears when the restoration is completed.
To close the dialog box and restart the GOT, touch the [OK] button.
6.10 SRAM management
6
6 - 115