Operation Settings (Settings For Operation); Operation Setting Functions - Mitsubishi Electric GOT2000 Series User Manual

12.2 Operation Settings (Settings for Operation)

12.2.1

Operation setting functions

Setting regarding GOT operation can be set.
The items which can be set are described below. If touch the each item part, the respective setting becomes possible.
Function
Buzzer volume
Window move buzzer
Key reaction
Calibration
Utility call
*1
"Key reaction" [ms]
12 - 6
12.2 Operation Settings (Settings for Operation)
Buzzer volume setting can be changed.
Whether turn ON/OFF buzzer when move window can be selected.
The touch panel sensitivity when touching the GOT screen can be set.
(For preventing chattering)
Calibrates the touch panel sensitivity
➠
12.2.4 Position correction of the touch panel (touch panel
calibration setting)
Utility call key setting screen can be displayed
➠
12.2.5 Setting the utility call keys
The more the value set for [Key reaction] is high, the more the key reaction speed slows.
Standard (±0)
For example, when the GOT recognizes touching the GOT screen once as touching the screen twice, set a higher value for [Key
reaction].
POINT POINT POINT
Operation setting by GT Designer3
Set buzzer volume and window move buzzer volume by selecting [Common] → [GOT
Environmental Setting] → [GOT Setup...] of GT Designer3.
When change a part of the setting, change the setting by the GOT display setting after
downloading the project data.
➠
GT Designer3 (GOT2000) Help
Description
+10 +20 +40
Setting range
OFF/SHORT/LONG
(At factory shipment: SHORT)
ON/OFF
(At factory shipment: ON)
*1
±0 to +120
-
-
+80 +120