Mitsubishi Electric GOT2000 Series User Manual page 173

■3. RGB display setting operation
Step 1.
Select an RGB channel No. to be displayed.
The RGB image for the selected channel No. is previewed.
Step 2.
The clock phase and screen display position (horizontal direction or vertical direction) can be changed.
Step 3.
When you touch the [Confirm] button, the setting contents are determined.
Step 4.
If you touch the
Step 5.
After completing all the items to set, if you touch the
Changes the Changes the
number a certain number to the
amount in the "-" touched position.
direction.
button without touching the [Confirm] button, the dialog shown below is displayed.
POINT POINT POINT
Precautions for setting
If the value for [Horizontal] or [Vertical] is too large, RGB display may not be performed or the
display may be disrupted or stopped.
If this happens, return the settings to their default values and make settings in the range where
RGB display is possible.
Changes the
number a certain
amount in the "+"
direction.
button, the display returns to [Video/RGB Setting].
3.7 Video/RGB
3
3 - 27