Setting the utility call keys
■1. Utility call key setting function
The key position for calling the main menu of the utility can be specified.
For the key position, the specification of 1 point from 4 corners on the screen, or no specification (0 point), can be set.
By keeping pressing the screen, a setting to switch the screen to the utility is available.
This prevents a switching to the utility by an unintentional operation.
■2. Utility call key display operation
Utility call key
Refer to the following for display operation of main menu.
Operation setting by GT Designer3
Set the utility call key by selecting [Common] → [GOT Environmental Setting] → [GOT Setup...]
from GT Designer3.
When change a part of the setting, change the setting by the GOT display setting after
downloading the project data.
GT Designer3 (GOT2000) Help
Touch the button to be
set as a utility call key.
9.3 Utility Display
12.2 Operation Settings (Settings for Operation)
12 - 11