11.7.3
Regist
Keyword is registered.
Step 1.
Touch "Regist" to display the selection screen for the registration.
For the FX series PLC, which is not compatible with Customer Keyword, the keyword entry screen of
[Step3] is displayed. Start the operation from [Step3].
For the Customer Keyword compatible models, refer to the manual of the PLC to be used.
Step 2.
Select [Keyword] or [Keyword+Custom].
To register only Keyword and 2nd keyword, touch [Keyword].
To register Customer Keyword, touch [Keyword+Custom].
Step 3.
Input a keyword.
Touch the display part of the keyword to be registered.
Step 4.
The keyboard for entering a keyword is displayed. Character types to be input can be changed by touching
the [A-F] or [0-9] button. Enter a keyword and touch the [ENT] key.
For the keyword, 8 digits from 0 to 9 or A to F must be set.
Touch
Touch
Touch
11 - 31
11.7 Keyword
11