■3. Upload operation
Package data written in drive C (Built-in flash memory) can be uploaded to drive A (Built-in SD card), drive B (USB
drive), drive E (USB drive), drive F (USB drive), and drive G (USB drive).
The data storage after uploading can be used for installing the package data on another GOT.
7. INSTALLATION OF BOOTOS AND BASIC SYSTEM APPLICATION
(The following procedure uses drive A as an example.)
Install the data storage used as the uploading destination to the GOT.
For installation/removal procedure of data storages, refer to the following.
GOT2000 Series User's Manual (Hardware)
Touch the upload source drive ([C:Flash Memory]) in [Select drive].
Touch the [Upload] button.
Touch the upload destination drive.
Touch the [Exec.] button to start uploading the package.
When the upload is completed, the dialog box shown below is displayed.
Touch the [OK] button to close the dialog.
6.8 Package Data Management
6 - 105