Trigger Backup Setting Operation - Mitsubishi Electric GOT2000 Series User Manual

3.5.3

Trigger backup setting operation

Step 1.
Touch a setting item for the trigger type, and then the setting is changed.
None: The GOT does not execute the trigger backup.
Rise: The GOT backs up data when the trigger device turns on.
Time: The GOT backs up data at the specified time.
Step 2.
Touch a setting item for check changes, and then the setting is changed.
: Backup is executed regardless of whether the backup data has been changed.
When the backup is executed, the GOT checks if the backup data and the data stored in the file register have
: been changed after the previous backup. When the data has been changed, the GOT backs up the changed
data.
When the backup is executed, the GOT checks if the backup data has been changed after the previous backup.
: When the data has been changed, the GOT backs up the changed data. However, the GOT does not check if the
data stored in the file register has been changed.
Step 3.
When the trigger type is changed, a password input window appears by touching the [OK] button.
Input the password for the backup/restore.
When the password is verified, the settings are reflected, and then the screen returns to the [trigger backup
setting] screen.
When the trigger type is not changed, touching the [OK] button reflects the settings.
If touch the [Cancel] button, the changed settings are canceled and the screen returns to the [Backup/
restoration] screen.
POINT POINT POINT
Precautions for setting
When the trigger type is set to [Rise], set the trigger device with GT Designer3 in advance.
Failure to do so disables the backup setting with [Rise] set.
(None Rise Time)
3.5 Trigger Backup
3
3 - 15