Screen display content
1) Connection status of the communication ports
Indicates the connection status of Standard I/F-1 and I/F-2.
Listed in the table below are display items and the connection status (channel number).
2) Communication status
Displays the communication status of each communication port.
The SD and RD symbols appear in black on gray (
While data are being sent or received, the SD and RD symbols appear as follows.
GT2104-P, GT2103-P: in black on white (
GT2105-QMBDS: in white on light gray (
GT2107-W, GT2105-QTBDS, GT2104-R: in white on red (
They may appear lit depending on the communication status.
The SD and RD symbols on the screen indicate normal communication or cable disconnection.
[During normal communication (with connection to a device that supports the transparent mode)]
The SD and RD of the I/F-1 flash.
[When the connecting cable with the controller is disconnected]
Only the SD of the I/F-1 flashes.
"PLC" appears when connected to a controller (PLC or microcomputer)
"BCR" appears when connected to a barcode reader or RFID
"TRANS." appears when the controller that is allocated to one of the communication
ports supports the transparent mode
"TRANS." automatically changes to "PC" when communicating with drawing software
"PC" appears when connected to a screen design software.
Appears when connected to a printer.
) while data are not being sent or received.
11.4 Communication Monitor
11 - 25