Mitsubishi Electric GOT2000 Series User Manual page 413

(2) Channel No. specification menu BOX
Set a channel number to be used by the standard interface.
➠ 11.1.5 Channel setting operation
For the detail of the drivers which can be assigned to each channel, refer to the following.
➠
(3) Driver display BOX
0: Set when the communication interface is not used.
1, 2: Set when connecting to a controller.
8: Set when connecting to a bar code reader, RFID or GOT (Extended Computer).
Set when connecting to a PC (drawing software).
*1
9:
• When multiple GOTs are connected, set this channel for the connection with the 2nd GOT.
A: Set this channel when connecting to a printer.
*: Set this channel when the Ethernet download function is used.
• "9" is automatically set to the standard I/F-3(USB).
(3) Driver display BOX
(a) The driver display box displays the names of communication drivers assigned to channels or the
communication drivers set in the communication settings of drawing software.
For details of the communication drivers to be displayed, refer to the following.
➠
GT Designer3 (GOT2000) Help
(b) "Disuse" is displayed in the driver display box in the following cases:
• The communication driver is not installed.
➠
15.2 OS information
• "0" is set in the channel number specification menu box.
(c) The channel number of the standard I/F-3(USB) is fixed to "9".
(4) button
Drv
Displays the driver setting screen.
Select the driver to use on the driver setting screen.
➠
11.1.6 Driver setting operation
The Drv button is displayed in the following case.
• When a channel number other than channel 0 or 9 is set to the standard I/F-1, standard I/F-2, and standard I/F-4
POINT POINT POINT
Precautions for communication between GOT and connected devices
(1) Installing [Communication driver] and downloading [Communication Settings]
(2) When the communication settings have not been downloaded
To perform communication with the connected device, the following actions are necessary.
1) Installing communication drivers (Up to 2 drivers)
2) Assigning channel numbers and communication drivers to communication interfaces
3) Downloading contents (project data) assigned in step 2)
Perform 1), 2) and 3) with drawing software.
For details, refer to the following.
➠
GT Designer3 (GOT2000) Help
If the communication settings have not been downloaded with drawing software, set the
communication settings on the drawing software or in the GOT utility screen.
11.1 Standard I/F
11
11 - 9