Touch the numerical part of the octet to be changed among the 1st to 4th octets.
When the ten-key pad appears, enter a numerical value in up to 3 digits, and touch the
If a numerical value outside the setting range is entered, the following error message appears. Enter a
numerical value again.
For the details of the setting range, refer to the following.
The changed IP address is displayed. At this time, the changed communication set value of the FX3U-
ENET-ADP is not written to the CPU. Touch the
When the screen shown below appears, touch the
Touch the numerical part
of the octet to be changed.
16.3 FX3U-ENET-ADP Communication Setting Function
16 - 43