Operating the memory card format
Install a data storage to the GOT.
For installation/removal procedure of data storages, refer to the following.
Touch and select the drive to format by drive selection.
If touch the [Format] button, the password input screen is displayed.
Type     and touch the [Enter] key. The dialog box shown below will appear. (The password is fixed
Confirm the contents of the dialog box, and touch the [OK] button to format of the data storage.
To cancel the format of the data storage, touch the [Cancel] button.
If touch the [OK] button by step4, the dialog mentioned below is displayed for reconfirm.
Reconfirm whether to format the data storage.
Touch the [OK] button to start the format.
Touch the [Cancel] button to cancel the format of the data storage.
6 - 118
6.11 Memory Card Format
GOT2000 Series User's Manual (Hardware)